Manual Units


Model 202 MODEL 202
back
Capacityone(1) standard, one(1)quart round can Dimensions Base: 10" x 7.75" Height 10.25"
Weight Approximately 6 lbs. Delivery Pressure 0-60 psi
Delivery volume 1.5 fluid oz. per full stroke
Filters and Seals:
Vent 5-micron nominal stainless steel disc Suction Line 10-micron nomina
Pressure Line 5-micron nominal* Seals specify fluid when ordering
*note: 3-micron absolute filters available upon request
Model H250-GQN MODEL H250-GQN
back
Capacityone(1) standard, one(1) gallon round can Dimensions Base: 13.75 dia. Height 15"
Weight Approximately 19 lbs. Delivery Pressure 0-250 psi
Delivery volume 1.5 fluid oz. per full stroke
Filters and Seals:
Vent 5-micron nominal stainless steel disc Suction Line 3-micron absolute
Pressure Line 5-micron nominal* Seals specify fluid when ordering
*note: 3-micron absolute filters available upon request
Optional Feature: Sight Tube Assembly which allows pressure to equalization and fluid level surveillance.

Model H250-1 MODEL H250-1
back
Capacityone(1) standard, one(1) gallon round can Dimensions Base: 13.75 dia. Height 15"
Weight Approximately 19 lbs. Delivery Pressure 0-250 psi
Delivery volume 1.5 fluid oz. per full stroke
Filters and Seals:
Vent 5-micron nominal stainless steel disc Suction Line 3-micron absolute
Pressure Line 5-micron nominal* Seals specify fluid when ordering
*note: 3-micron absolute filters available upon request
Additional Features: Heavy-duty air trap for decreasing the amount of air pumped into the hydraulic system . 0-300 lb. guage . Sight Tube Hose pressure relief valve.
Model 630 MODEL 630
back
CapacityThree (3) gallons, Two (2) gal. resevoir. One (1) gal. container Dimensions Base: 14" dia. Height 21.8"
Weight Approximately 28 lbs. Delivery Pressure 0-250 psi
Delivery volume 1.5 fluid oz. per full stroke
Filters and Seals:
Vent 5-micron nominal stainless steel disc Suction Line 3-micron absolute
Pressure Line 5-micron nominal* Seals specify fluid when ordering

Model 310 MODEL 310
back
Capacityone(1) ten (10) gallon round can Dimensions Base: 29" high x 26" wide x 28" long
Weight Approximately 50 lbs. (dry) Delivery Pressure 0-250 psi
Delivery volume 1.5 fluid oz. per full stroke
Filters and Seals:
Vent 5-micron nominal stainless steel disc Suction Line 3-micron absolute
Pressure Line 5-micron nominal* Seals specify fluid when ordering
*note: 3-micron absolute filters available upon request
Additional Features: . 0-300 lb. guage . Manually controlled brakes




Powered Units
Model 710-GS MODEL 710-GS
back
Fluid Deaeration Unit
The SEI Model 710-GS Dielectric Fluid Deaeration unit is an electrically operated, mobile service unit for on-site processing, where filtering and removal of dissolved gasses and moisture are required in a single operation.
The Model 710-GS also has the capability of storing the processed fluid and later transferring it in the "degassed" state back to the source using a hand pump
Capacity7.5 U.S. gallons Dimensions 63" L x 33" W x 47" H
(tongue upright)
Weight 451 pounds (packaged) Hand Pump Delivery 0-30 psi, 1.5 fluid oz. per full stroke
Filters and Seals:
Vent air 10-micron nominal Fluid 3-micron absolute
Seals Standard O-Rings
Hoses:
Delivery & Return 10 ft. braided MS28741-8-120 Fluid Sampling Fluid sampling port on the top of the control panel
Moisture Protection Desiccant chamber in series with processing reservoir and overflow chamber Power Ring 115 vac, 60Hz, 15 Amp.

Model 900 MODEL 900
back
Landing Gear Shock Strut Servicing Unit
The SEI Model 900 special purpose unit is ground support equipment specifically used to service the Grumman F-14 Tomcat weapon system. The function of the servicing unit is to evaluate and fill the F-14 main and nose landing gear shock struts with fresh, clean MIL-H-5606 (or SAE 10) hydraulic fluid. It is designed to operate on shop air with a minimum of 80 psi. Other important features are:

    • Mobile; mounted on a three(3) wheel cart. The two side wheels are equipped with manually-controlled brakes.
    • Uses an air driven vacuum pump capable of an ultimate vacuum of 10 millimeters of mercury.
    • The filter is an in-line housing with a replaceable element which supplies the aircraft with fluid filtered to 3-microns absolute.
    • The supply adn return reservoirs are transparent with a volume of five (5) gal. each.
    • Input Power: Compressed air (80-100 psi)
    • dimensions: 37.6" H x 28.7" L x 30.4" W., weight: 175 lbs.

For more information, E-mail or call:

943 S. Andreasen Dr, Escondido, CA 92029-1934
TEL: 760-746-6459, FAX: 760-745-2511